Repository navigation
Multi-probe Dallas splitter support, SEN55 read fix, fleet diagnostics (26.11.12.1) - #37
Merged
Merged
Conversation
Port TEMP-1's multi-probe change (TEMP-1 2af97e2) so up to four Dallas
probes can share the left 3.5mm port through the Multi-Probe Splitter
with no yaml edits.
- Existing probe (dallas_temp_probe, "Temperature Probe (Dallas)") gets
index: 0. Its id and name are unchanged, so HA entities carry over.
Without an index it refused to read anything once a second probe was
on the bus ("More than one device, can't auto-select address").
- New dallas_temp_probe_2/3/4 at index 1/2/3, disabled by default.
- reportAllValues also updates probes 2-4 so sleeping units publish
them before deep sleep (TEMP-1 only updates probe 1 there).
- min_version 2025.11.0: the one_wire index option first shipped in
ESPHome 2025.11.0.
- Version 26.10.19.1.
Probe numbering follows 1-Wire ROM order, not splitter port, and is
resolved at boot. Absent indexes log one error at boot and are never
polled.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Both components talk to the SEN55 at 0x69. sen5x_number's read is
atomic (write 0x0413, blocking 20 ms delay, read), while sen55 sends
"read measurement" and reads 20 ms later from a scheduled timeout.
All component.update actions run synchronously until the script's
first delay, so with sen5x_number second its command always landed
inside sen55's window: sen55 then read 0xFF ("CRC invalid", "Read data
error (7)") and lost its reading on every deep-sleep wake.
Same fix as Updates-and-fixes, which was never merged to main.
Bench-confirmed on 26.10.19.1: one CRC error per wake before this change.
Version 26.10.19.2.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Match the diagnostics Apollo's other devices expose: - Core: ESPHome Version (version platform, hide_timestamp) and Apollo Firmware Version (template text sensor published once at on_boot priority 500, the form TEMP-1 settled on after the "unknown" fix). - WiFi: RSSI (wifi_signal, 60 s), IP Address, plus Connected SSID, Connected BSSID and MAC Address disabled by default (H-3 set). - Ethernet: IP Address, plus MAC Address disabled by default. All diagnostic category. Purely additive: no existing entity is renamed, removed or changes domain, so HA entity ids and history carry over. Plain "IP Address"/"MAC Address" names follow the split R_PRO-1 and every WiFi-only product, and stay the same entity if a unit switches between the W and ETH images. Left out on purpose: readable uptime (the fleet PRs were closed unmerged on 2026-10-02, and it would read "0m" on short wakes), Network Connection (only meaningful in a unified image), API encryption (breaks HA pairing on live units). Version 26.10.19.3. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
Important
This repository does not receive automatic reviews because it has fewer than 10 stars.
|
Comment-only change; the validated config and firmware are unchanged. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Version: 26.11.12.1
What does this implement/fix?
Adds multi-probe Dallas support (up to 4 probes on the 3.5 mm splitter; probes 2-4 disabled by default), fixes the SEN55 read collision that dropped a reading on every deep-sleep wake, and adds the fleet-standard diagnostics (ESPHome/Apollo Firmware Version, IP/MAC, plus RSSI/SSID/BSSID on WiFi). No existing entities are renamed or removed, and the OTA from production 26.5.20.1 was bench-tested on WiFi and Ethernet (about 30 h on Ethernet with 0 crashes). Ethernet risk: since ESPHome 2026.6 the W5500 driver can hit an unfixed ESP-IDF race (espressif/esp-idf#18527, esphome/esphome#18974), so roll out to one WiFi and one Ethernet unit first and watch Uptime before the rest; battery units should update with Prevent Sleep on.
Types of changes
Checklist / Checklijst:
If user-visible functionality or configuration variables are added/modified:
🤖 Generated with Claude Code