Skip to content
Open
Show file tree
Hide file tree
Changes from all commits
Commits
File filter

Filter by extension

Filter by extension


Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
2 changes: 1 addition & 1 deletion esphome-constraints.txt
Original file line number Diff line number Diff line change
Expand Up @@ -8,4 +8,4 @@
# as the early-warning tier. Not the package's runtime dependency (that stays
# esphome>=… in pyproject); this only constrains CI installs via uv pip
# install -c.
esphome==2026.11.0b4
esphome==2026.11.0
2 changes: 1 addition & 1 deletion esphome_device_builder/definitions/automations.index.json
Original file line number Diff line number Diff line change
Expand Up @@ -794,7 +794,7 @@
{"description":"This condition checks if the remote peer is *online*.","docs_url":"https://esphome.io/automations/actions","domain":"wireguard","id":"wireguard.peer_online","name":"Wireguard → Peer Online"},
{"accepts_condition_list":true,"description":"Check a combination of conditions. `all` is a synonym for `and`, and `any` is a synonym for `or`. `all` and `any` may also be used directly in place of `condition`.","docs_url":"https://esphome.io/automations/actions","domain":"core","id":"xor","name":"Xor"}
],
"esphome_schema_version":"2026.11.0b4",
"esphome_schema_version":"2026.11.0",
"filters":[
{"applies_to":["binary_sensor"],"id":"autorepeat","name":"Binary Sensor → Autorepeat"},
{"applies_to":["binary_sensor"],"duration_min_unit":"ms","id":"delayed_off","name":"Binary Sensor → Delayed Off","templatable":true,"value_type":"time_period"},
Expand Down
334 changes: 167 additions & 167 deletions esphome_device_builder/definitions/components.index.json

Large diffs are not rendered by default.

2 changes: 1 addition & 1 deletion esphome_device_builder/definitions/components/as734x.json

Large diffs are not rendered by default.

Original file line number Diff line number Diff line change
@@ -1 +1 @@
{"id":"audio_adc.es7243","name":"ES7243","description":"The `es7243` platform allows your ESPHome devices to use the ES7243 stereo audio ADC ([datasheet](http://www.everest-semi.com/pdf/ES7243%20PB.pdf)). This allows attached microphones to be used as a microphone input via [I2S Audio](https://esphome.io/components/microphone/i2s_audio/). The chip is found on the ESP32-LyraT-Mini.","category":"audio_adc","dependencies":["i2c","i2s_audio"],"multi_conf":true,"supported_platforms":["esp32"],"config_entries":[{"key":"address","type":"integer","label":"Address","description":"The I²C address of the driver. Defaults to `0x13`.","default_value":"19","range":[0,255],"display_format":"hex"},{"key":"i2c_id","type":"id","label":"I2C ID","description":"The ID of the [I²C bus](https://esphome.io/components/i2c/) the ES7243 is connected to.","display_format":null,"references_component":"i2c"},{"key":"i2s_audio_id","type":"id","label":"I2S Audio ID","description":"The ID of the [I2S Audio](https://esphome.io/components/i2s_audio/) bus whose `i2s_mclk_pin` clocks the chip. Required when more than one bus is configured.","display_format":null,"references_component":"i2s_audio"},{"key":"id","type":"id","label":"ID","advanced":true},{"key":"mic_gain","type":"float_with_unit","label":"Mic Gain","description":"The gain applied to the ADC microphones. One of `1dB`, `3.5dB`, `18dB`, `20.5dB`, `22.5dB`, `24.5dB`, `25dB` or `27dB`. Defaults to `27dB`.","default_value":"27db","options":[{"label":"1","value":"1"},{"label":"18","value":"18"},{"label":"25","value":"25"},{"label":"27","value":"27"},{"label":"3.5","value":"3.5"},{"label":"20.5","value":"20.5"},{"label":"22.5","value":"22.5"},{"label":"24.5","value":"24.5"}],"display_format":null,"advanced":true,"unit_options":["dB","dBm"]},{"key":"setup_priority","type":"float","label":"Setup Priority","display_format":null,"advanced":true,"hidden":true}]}
{"id":"audio_adc.es7243","name":"ES7243","description":"The `es7243` platform allows your ESPHome devices to use the ES7243 stereo audio ADC ([datasheet](http://www.everest-semi.com/pdf/ES7243%20PB.pdf)). This allows attached microphones to be used as a microphone input via [I2S Audio](https://esphome.io/components/microphone/i2s_audio/). The chip is found on the ESP32-LyraT-Mini.","category":"audio_adc","docs_url":"https://esphome.io/components/audio_adc/es7243/","image_url":"https://esphome.io/images/badges/es7243.svg","dependencies":["i2c","i2s_audio"],"multi_conf":true,"supported_platforms":["esp32"],"config_entries":[{"key":"address","type":"integer","label":"Address","description":"The I²C address of the driver. Defaults to `0x13`.","default_value":"19","range":[0,255],"display_format":"hex","help_link":"https://esphome.io/components/audio_adc/es7243/#configuration-variables"},{"key":"i2c_id","type":"id","label":"I2C ID","description":"The ID of the [I²C bus](https://esphome.io/components/i2c/) the ES7243 is connected to.","display_format":null,"references_component":"i2c","help_link":"https://esphome.io/components/audio_adc/es7243/#configuration-variables"},{"key":"i2s_audio_id","type":"id","label":"I2S Audio ID","description":"The ID of the [I2S Audio](https://esphome.io/components/i2s_audio/) bus whose `i2s_mclk_pin` clocks the chip. Required when more than one bus is configured.","display_format":null,"references_component":"i2s_audio","help_link":"https://esphome.io/components/audio_adc/es7243/#configuration-variables"},{"key":"id","type":"id","label":"ID","advanced":true},{"key":"mic_gain","type":"float_with_unit","label":"Mic Gain","description":"The gain applied to the ADC microphones. One of `1dB`, `3.5dB`, `18dB`, `20.5dB`, `22.5dB`, `24.5dB`, `25dB` or `27dB`. Defaults to `27dB`.","default_value":"27db","options":[{"label":"1","value":"1"},{"label":"18","value":"18"},{"label":"25","value":"25"},{"label":"27","value":"27"},{"label":"3.5","value":"3.5"},{"label":"20.5","value":"20.5"},{"label":"22.5","value":"22.5"},{"label":"24.5","value":"24.5"}],"display_format":null,"advanced":true,"help_link":"https://esphome.io/components/audio_adc/es7243/#configuration-variables","unit_options":["dB","dBm"]},{"key":"setup_priority","type":"float","label":"Setup Priority","display_format":null,"advanced":true,"hidden":true}]}
Original file line number Diff line number Diff line change
@@ -1 +1 @@
{"id":"audio_dac.es9038q2m_katana","name":"ES9038Q2M Katana","description":"The `es9038q2m_katana` platform allows ESPHome devices to control DAC boards that expose an ES9038Q2M through an Allo Katana-compatible control interface.","category":"audio_dac","dependencies":["i2c"],"multi_conf":true,"config_entries":[{"key":"address","type":"integer","label":"Address","description":"The I²C address of the control interface. Defaults to `0x30`.","default_value":"48","range":[0,255],"display_format":"hex"},{"key":"i2c_id","type":"id","label":"I2C ID","description":"The ID of the I²C bus the device is connected to.","display_format":null,"references_component":"i2c"},{"key":"id","type":"id","label":"ID","advanced":true},{"key":"bits_per_sample","type":"string","label":"Bits Per Sample","description":"The audio sample bit depth written to the format register during startup. One of `16bit`, `24bit`, or `32bit`. Defaults to `16bit`.","default_value":"16bit","options":[{"label":"16bit","value":"16bit"},{"label":"24bit","value":"24bit"},{"label":"32bit","value":"32bit"}],"display_format":null,"advanced":true},{"key":"deemphasis","type":"string","label":"Deemphasis","description":"Selects the de-emphasis curve. One of `bypass`, `32khz`, `44_1khz`, or `48khz`. Defaults to `bypass`.","default_value":"bypass","options":[{"label":"bypass","value":"bypass"},{"label":"32khz","value":"32khz"},{"label":"44_1khz","value":"44_1khz"},{"label":"48khz","value":"48khz"}],"display_format":null,"advanced":true},{"key":"dop","type":"boolean","label":"Dop","description":"Enables DoP mode on the control interface. Defaults to `false`.","default_value":false,"display_format":null,"advanced":true},{"key":"filter_shape","type":"string","label":"Filter Shape","description":"Selects the DAC digital filter. One of `linear_phase_fast`, `linear_phase_slow`, `minimum_phase_fast`, `minimum_phase_slow`, `apodizing`, `hybrid`, or `brick_wall`. Defaults to `apodizing`.","default_value":"apodizing","options":[{"label":"linear_phase_fast","value":"linear_phase_fast"},{"label":"linear_phase_slow","value":"linear_phase_slow"},{"label":"minimum_phase_fast","value":"minimum_phase_fast"},{"label":"minimum_phase_slow","value":"minimum_phase_slow"},{"label":"apodizing","value":"apodizing"},{"label":"hybrid","value":"hybrid"},{"label":"brick_wall","value":"brick_wall"}],"display_format":null,"advanced":true},{"key":"sample_rate","type":"integer","label":"Sample Rate","description":"The sample rate written to the format register during startup. One of `44100`, `48000`, `88200`, `96000`, `176400`, `192000`, `352800`, or `384000`. Defaults to `48000`.","default_value":"48000","options":[{"label":"44100","value":"44100"},{"label":"48000","value":"48000"},{"label":"88200","value":"88200"},{"label":"96000","value":"96000"},{"label":"176400","value":"176400"},{"label":"192000","value":"192000"},{"label":"352800","value":"352800"},{"label":"384000","value":"384000"}],"display_format":null,"advanced":true},{"key":"setup_priority","type":"float","label":"Setup Priority","display_format":null,"advanced":true,"hidden":true}]}
{"id":"audio_dac.es9038q2m_katana","name":"ES9038Q2M Katana","description":"The `es9038q2m_katana` platform allows ESPHome devices to control DAC boards that expose an ES9038Q2M through an Allo Katana-compatible control interface.","category":"audio_dac","docs_url":"https://esphome.io/components/audio_dac/es9038q2m_katana/","image_url":"https://esphome.io/images/badges/es9038q2m.svg","dependencies":["i2c"],"multi_conf":true,"config_entries":[{"key":"address","type":"integer","label":"Address","description":"The I²C address of the control interface. Defaults to `0x30`.","default_value":"48","range":[0,255],"display_format":"hex","help_link":"https://esphome.io/components/audio_dac/es9038q2m_katana/#configuration-variables"},{"key":"i2c_id","type":"id","label":"I2C ID","description":"The ID of the I²C bus the device is connected to.","display_format":null,"references_component":"i2c","help_link":"https://esphome.io/components/audio_dac/es9038q2m_katana/#configuration-variables"},{"key":"id","type":"id","label":"ID","advanced":true},{"key":"bits_per_sample","type":"string","label":"Bits Per Sample","description":"The audio sample bit depth written to the format register during startup. One of `16bit`, `24bit`, or `32bit`. Defaults to `16bit`.","default_value":"16bit","options":[{"label":"16bit","value":"16bit"},{"label":"24bit","value":"24bit"},{"label":"32bit","value":"32bit"}],"display_format":null,"advanced":true,"help_link":"https://esphome.io/components/audio_dac/es9038q2m_katana/#configuration-variables"},{"key":"deemphasis","type":"string","label":"Deemphasis","description":"Selects the de-emphasis curve. One of `bypass`, `32khz`, `44_1khz`, or `48khz`. Defaults to `bypass`.","default_value":"bypass","options":[{"label":"bypass","value":"bypass"},{"label":"32khz","value":"32khz"},{"label":"44_1khz","value":"44_1khz"},{"label":"48khz","value":"48khz"}],"display_format":null,"advanced":true,"help_link":"https://esphome.io/components/audio_dac/es9038q2m_katana/#configuration-variables"},{"key":"dop","type":"boolean","label":"Dop","description":"Enables DoP mode on the control interface. Defaults to `false`.","default_value":false,"display_format":null,"advanced":true,"help_link":"https://esphome.io/components/audio_dac/es9038q2m_katana/#configuration-variables"},{"key":"filter_shape","type":"string","label":"Filter Shape","description":"Selects the DAC digital filter. One of `linear_phase_fast`, `linear_phase_slow`, `minimum_phase_fast`, `minimum_phase_slow`, `apodizing`, `hybrid`, or `brick_wall`. Defaults to `apodizing`.","default_value":"apodizing","options":[{"label":"linear_phase_fast","value":"linear_phase_fast"},{"label":"linear_phase_slow","value":"linear_phase_slow"},{"label":"minimum_phase_fast","value":"minimum_phase_fast"},{"label":"minimum_phase_slow","value":"minimum_phase_slow"},{"label":"apodizing","value":"apodizing"},{"label":"hybrid","value":"hybrid"},{"label":"brick_wall","value":"brick_wall"}],"display_format":null,"advanced":true,"help_link":"https://esphome.io/components/audio_dac/es9038q2m_katana/#configuration-variables"},{"key":"sample_rate","type":"integer","label":"Sample Rate","description":"The sample rate written to the format register during startup. One of `44100`, `48000`, `88200`, `96000`, `176400`, `192000`, `352800`, or `384000`. Defaults to `48000`.","default_value":"48000","options":[{"label":"44100","value":"44100"},{"label":"48000","value":"48000"},{"label":"88200","value":"88200"},{"label":"96000","value":"96000"},{"label":"176400","value":"176400"},{"label":"192000","value":"192000"},{"label":"352800","value":"352800"},{"label":"384000","value":"384000"}],"display_format":null,"advanced":true,"help_link":"https://esphome.io/components/audio_dac/es9038q2m_katana/#configuration-variables"},{"key":"setup_priority","type":"float","label":"Setup Priority","display_format":null,"advanced":true,"hidden":true}]}
2 changes: 1 addition & 1 deletion esphome_device_builder/definitions/components/bh1745.json
Original file line number Diff line number Diff line change
@@ -1 +1 @@
{"id":"bh1745","name":"BH1745 RGB Color Sensor","description":"The `bh1745` component allows you to use your BH1745 (BH1745NUC) RGB color sensor ([datasheet](https://github.com/latonita/datasheets-storage/blob/main/sensors/BH1745NUC_ROHM_S_A0001988929_1-2561519.pdf), [Pimoroni](https://shop.pimoroni.com/products/bh1745-luminance-and-colour-sensor-breakout)) with ESPHome. It reports the red, green, blue and clear channel readings and calculates the illuminance and the color temperature of the light.","category":"misc","dependencies":["i2c"],"multi_conf":true,"config_entries":[{"key":"address","type":"integer","label":"Address","description":"Manually specify the I²C address of the sensor. Defaults to `0x38`.","default_value":"56","range":[0,255],"display_format":"hex"},{"key":"i2c_id","type":"id","label":"I2C ID","display_format":null,"references_component":"i2c"},{"key":"update_interval","type":"time_period","label":"Update Interval","description":"The interval to read the sensor. Defaults to `60s`.","default_value":"60s","display_format":null,"duration_min_unit":"ms"},{"key":"id","type":"id","label":"ID","description":"Manually specify the ID for this hub. Use this if you want to use more than one BH1745 sensor.","advanced":true},{"key":"gain","type":"string","label":"Gain","description":"The gain of the internal ADC. Higher values work better in low light. One of `1X`, `2X` or `16X`. Defaults to `1X`.","default_value":"1X","options":[{"label":"1X","value":"1X"},{"label":"2X","value":"2X"},{"label":"16X","value":"16X"}],"display_format":null,"advanced":true},{"key":"glass_attenuation_factor","type":"float","label":"Glass Attenuation Factor","description":"Use this when the sensor sits behind glass or another cover that blocks some of the light. The illuminance is multiplied by this value to make up for the lost light: `1.0` means all light passes through, `2.0` means half of it does. Must be at least `1.0`. Defaults to `1.0`.","default_value":"1.0","display_format":null,"advanced":true},{"key":"integration_time","type":"time_period","label":"Integration Time","description":"How long the sensor collects light for each measurement. Longer times work better in low light. One of `160ms`, `320ms`, `640ms`, `1280ms`, `2560ms` or `5120ms`. Defaults to `160ms`.","default_value":"160ms","display_format":null,"advanced":true},{"key":"setup_priority","type":"float","label":"Setup Priority","display_format":null,"advanced":true,"hidden":true}]}
{"id":"bh1745","name":"BH1745 RGB Color Sensor","description":"The `bh1745` component allows you to use your BH1745 (BH1745NUC) RGB color sensor ([datasheet](https://github.com/latonita/datasheets-storage/blob/main/sensors/BH1745NUC_ROHM_S_A0001988929_1-2561519.pdf), [Pimoroni](https://shop.pimoroni.com/products/bh1745-luminance-and-colour-sensor-breakout)) with ESPHome. It reports the red, green, blue and clear channel readings and calculates the illuminance and the color temperature of the light.","category":"misc","docs_url":"https://esphome.io/components/sensor/bh1745/","image_url":"https://esphome.io/images/bh1745.jpg","dependencies":["i2c"],"multi_conf":true,"config_entries":[{"key":"address","type":"integer","label":"Address","description":"Manually specify the I²C address of the sensor. Defaults to `0x38`.","default_value":"56","range":[0,255],"display_format":"hex","help_link":"https://esphome.io/components/sensor/bh1745/#configuration-variables"},{"key":"i2c_id","type":"id","label":"I2C ID","display_format":null,"references_component":"i2c"},{"key":"update_interval","type":"time_period","label":"Update Interval","description":"The interval to read the sensor. Defaults to `60s`.","default_value":"60s","display_format":null,"help_link":"https://esphome.io/components/sensor/bh1745/#configuration-variables","duration_min_unit":"ms"},{"key":"id","type":"id","label":"ID","description":"Manually specify the ID for this hub. Use this if you want to use more than one BH1745 sensor.","advanced":true,"help_link":"https://esphome.io/components/sensor/bh1745/#configuration-variables"},{"key":"gain","type":"string","label":"Gain","description":"The gain of the internal ADC. Higher values work better in low light. One of `1X`, `2X` or `16X`. Defaults to `1X`.","default_value":"1X","options":[{"label":"1X","value":"1X"},{"label":"2X","value":"2X"},{"label":"16X","value":"16X"}],"display_format":null,"advanced":true,"help_link":"https://esphome.io/components/sensor/bh1745/#configuration-variables"},{"key":"glass_attenuation_factor","type":"float","label":"Glass Attenuation Factor","description":"Use this when the sensor sits behind glass or another cover that blocks some of the light. The illuminance is multiplied by this value to make up for the lost light: `1.0` means all light passes through, `2.0` means half of it does. Must be at least `1.0`. Defaults to `1.0`.","default_value":"1.0","display_format":null,"advanced":true,"help_link":"https://esphome.io/components/sensor/bh1745/#configuration-variables"},{"key":"integration_time","type":"time_period","label":"Integration Time","description":"How long the sensor collects light for each measurement. Longer times work better in low light. One of `160ms`, `320ms`, `640ms`, `1280ms`, `2560ms` or `5120ms`. Defaults to `160ms`.","default_value":"160ms","display_format":null,"advanced":true,"help_link":"https://esphome.io/components/sensor/bh1745/#configuration-variables"},{"key":"setup_priority","type":"float","label":"Setup Priority","display_format":null,"advanced":true,"hidden":true}]}

Large diffs are not rendered by default.

Loading
Loading